How to distinguish the quality of stainless steel cabinets?

- Jun 05, 2019-

As a consumer, how do you identify the quality of stainless steel cabinets when making a choice?

1, look at the appearance of the texture: the door panel must be no high and low undulating state, the door joints must be uniform and uniform, the gap size is uniform. The door panel opens freely. There is no noise in the drawer.

2, look at the countertop: high-quality stainless steel cabinet countertops with high finish, not easy to show smudges, no solder joints, inferior quality, rough feel, will change color after a long time.

3, look at the processing of sheet metal: If the sheet is not qualified or the equipment is not fine, there will be a phenomenon of edge-opening, and in the future, the phenomenon of opening the glue will occur soon.

4, look at the link: high-quality stainless steel cabinets are countertops and basins, as well as the back water is integrated, not welded or bonded, there will be no water leakage.

5, look at the hanging cabinet hanging code: generally ask whether the hanging cabinet hanging code can be adjusted, the regular manufacturers are using the hanging code installation method, after the cabinet is installed, the height and the left and right can be properly adjusted. The cabinet is disassembled, the screw is buckled, and the cabinet is quite neat.

6, see if there is a burst: see if there is a blast on the door. Open the door to see if there is an adjustment hole in the laminate. The adjustment holes of the laminate are generally uniform and uniform, and there is no blast at the periphery of the hole. The regular manufacturers are equipped with professional slotting machines. The sides of the slots are smooth and tidy, and there is no blasting.

1


7, look at the cabinet: high-quality stainless steel cabinets, the cabinet is strong, not easy to deform, on the contrary, inferior quality is easy to deform.

8, look at the closing: high-quality stainless steel cabinets, the mouth will be covered with a layer of stainless steel or other anti-scratch plastic, inferior quality will not pack, bare stainless steel is easy to cause scratches.

9, look at the edge: the end of the plate to be edged. Professional manufacturers use special machinery to seal the edges. The manual edge sealing treatment of the general workshop small factory is relatively rough.

10. Look at the side trimming: whether the color of the side trimming part is consistent with the front side, and whether there is any oily rubbing mark on the edge sealing part, because the edge of the inferior edge banding is repaired, if it is rubbed with oil, the pore will be closed.

11, look at the basin cabinet: high-quality stainless steel cabinets, the basin cabinet body is relatively smooth, it is not easy to leave water marks, the inferior quality will be rough, easy to get wet and long green rust.

12, check the drawer: door hardware and other moving hardware components, the switch should be flexible, no noise, with or without anti-collision or self-closing function. It can check whether the hardware accessories selected by the product meet the standard. The cabinets designed and manufactured by professional manufacturers should have a mountain connection between the cabinets, and the overall firmness is good. The bottom of the cabinet is equipped with flat adjustment feet, which can adjust the level of the cabinet and have waterproof function. An integrated mobile skirting board should be provided to facilitate the cleaning of the bottom of the cabinet.