First, turn on the power supply switch and gas bottle switch. You should set the setting of all controllers to o, and then turn on the power switch of the gas oven layer. Turn the heating temperature knob to make the pointer point to the set temperature, the heating indicator on will be on, the gas oven will start heating, when the temperature in the oven reaches the set temperature, it will automatically turn off, the insulation indicator off will be on, and the automatic insulation will be carried out. When the temperature is lower than the set temperature of 5 ℃, the automatic ignition system will be started to keep the set furnace temperature. It's the same if you're going to fire.
If you have set the temperature of the upper and lower fire, and the fire of the gas oven is not on, then 10 seconds later, the gas valve will automatically close and give an alarm. At this time, you should turn the two temperature controllers of the upper and lower fire back to the o position, and then turn to the set temperature again. If the gas oven can't work after repeated operation for more than three times, it is necessary to troubleshoot and maintain the gas oven.https://www.evergrillw.com/