Reasons for cleaning smokeless grills

- Jun 17, 2020-

Smoke-free barbecue grills can be regarded as a modern trend. Their environmental protection and practicality have always been the top concerns of people, but sometimes there will be some problems in the use process. In order to ensure the normal use of the equipment, we need to promptly Cleaning and maintenance, in order to be able to repair quickly, this needs to understand the reasons.

Smokeless grills have problems. When the purifier is working properly, the electric field emits a slight continuous and stable "chi" electrostatic discharge sound, the green light is off, and the red light is on. When the purifier is working, there is a "slap, crack" high-pressure discharge sound, which is normal. When the purifier is in use, the green light turns off and on, and the red light also lights up, indicating that the purifier needs cleaning.

If it is not cleaned, the purifier will automatically determine and enter the protection state. When the purifier is in use, the red light is on and the green light is off. This means that the purifier has entered the automatic protection state and has stopped working. After cleaning the electric field, the purifier can enter a normal working state. The electric field is working normally. Check whether the polarity of the electric field is reversed, the negative pole is connected to the positive line, and the positive pole is connected to the plate. When the electric field is working, the noise is slight, the high-voltage module has a problem, replace it. There is much dirt on the electric field. Module damage due to high voltage. The input power supply is normal, the delay circuit is normal, the electric field does not sound after the delay, the fault light is on, and the reset circuit continues to operate, indicating that the high voltage module is damaged and needs to be replaced. The reset switch of the fault protection module is in the final protection state, short circuit in the electric field, and clear the short circuit point. The electric field has too much scaling and needs to be cleaned.

When the smokeless grill fails, first check whether the equipment needs to be cleaned to avoid equipment failure due to incomplete cleaning. At the same time, when the equipment is purchased, I want the merchant to understand its cleaning method and cleaning time, and carry out cleaning treatment in a timely manner.https://www.evergrillw.com/